Impact Driver Machine, 40V 210Nm 1/4" 6.35mm TD003GZ Cordless w/o Battery & Charger: Makita
Non-returnable
₹16,365.00
Out of stock
_productIds
358315000002092919,358315000002518049,358315000002805053,358315000007239705,358315000007118605,358315000007118614,358315000002069195,358315000002069204,358315000002073599,358315000002073653,358315000002073671 Specification
Capacity: Machine screw: M4 – M8 (5/32 – 5/16″) High strength bolt: M5 – M14 (3/16 – 9/16″) Steel: 22 mm (7/8″) Wood (Self-feed bit): N/A mm (N/A”) Standard bolt: M5 – M16 (3/16 – 5/8″) Coarse thread (in length): 22 – 125 mm (7/8 – 4-7/8″) Wood (Auger bit): 24 mm (15/16″) Masonry drill diameter: N/A mm (N/A”) Hole saw diameter: 38 mm (1-1/2″) Shank/Drive: Hex Shank 6.35 mm (1/4″) No Load Speed (RPM): Max / Hard / Med. / Soft / T mode: 0 – 3,700 / 0 – 3,200 / 0 – 2,100 / 0 – 1,100 / 0 – 2,400 Impacts per minute (IPM): Max / Hard / Med. / Soft / T mode: 0 – 4,100 / 0 – 3,600 / 0 – 2,600 / 0 – 1,400 / N/A Fastening torque: Hard / Med. / Soft: 170 / 50 / 20 N·m (1,510 / 440 / 180 in.lbs.) Max fastening torque: 210 N·m (1,860 in.lbs.) Max output: 520 W